Hi folks,
I have got a Roland E-09 Synthesizer with 2 ways of Output: Via Audio L/R and via MIDI L/R. Today I bought a cable with a small 3.5 mm jack on one end and 2 big 6.3 mm jacks on the other end. I am trying to use the cable to plug my Synthesizer directly into my PC, which runs on Vista(Blaargh!), to be able to make clean, direct recordings from my synthesizer.

So I plugged the 2 big audio jacks in the Left and Right output wholes of my Synth and the small 3.5 mm jack into the back of my PC.

My problem is I can't record with my simple track recording freeware program; Audacity. Pressing Record makes a windows-promt message appear that sais "Error opening sound-device. Check input configurations of the device and the Samplefrequency of the Project" (My recording program audacity works with the term "Project so I'm guessing that's what that last part means)
I have no idea what to do in order to properly connect my Sythesizer directly into my PC.

A Question:
-Of the two 6.3 mm jacks, 1 is marked red and 1 is marked white; Which color goes into what whole? Like which color goes in Left and which color goes in Right on the backside of my Synth?

Here's what I tried:
The back of my PC has alot of 3.5 mm input wholes. A Blue one(Line in), a Green one(Front Speaker Out), a Pink one(Microphone In), a Black one(Speaker Out), a Salmon/Creme Pink one(Speaker Out) and a Grey one(Speaker Out).
Now innitially I tried plugging my Synthesizer into the Blue Line In(You get a pop-upscreen with options as to how to classify the connected device; I checked "Line In" and clicked OK), but it gave the error promt, the one I mentioned earlier, when I attempted to record. I then tried to pull it out and plug it back into the blue line in whole again, but then classify it as "Mic In" and clicked OK. Still it couldn't record, giving the same error promt.

Then I tried Plugging it into the Pink Mic In whole and classify it as Line in. Error. Tried to do it again but then classify it as "Mic In". Error.



Erm Anybody who's experienced with or knowledged about connecting an Audio device with Left & Right output into the Input of a PC, please....
Help?