Here is some extra info in case you don't know what everything does:
Audio Cue- This will play an audio file at a specified time. Currently .wav; .mp3; .mid is supported.
Visual Cue- This will flash the screen once, or at 1 second intervals until the specified time expires.
Loop- With audio, this will play a sound over and over immediately after it ends until time expires. With visual, the same but the screen will flash instead.
Repeat- This will repeat an alarm every specified amount of time. So if you have an alarm set for 2:00 with a repeat of 90, it will go off at 2:00, 3:30, 5:00, etc.
Start At- The time for the alarm to go off
End At- (Only with a loop) The time for the alarm to stop playing. In the case of a repeating AND looping alarm, the end time will automatically be adjusted for each repeat.
File- Specifies whether a sound file is selected to play or not.
Color- The color of which the screen will flash for that alarm. If more than one alarm is set to flash at the same time, the alarm with the highest ID number will be used.
NOTE: To increase a value (such as time) press/hold left mouse button, to decrease press/hold right mouse button.
Bookmarks